If you suspect your premises are
bugged, for your own piece of mind, check it out. The TD-53 with
its P-01 Wideband
RF probe can can be used to detect, verify and locate
hidden transmitters in your home, office or car.Use the TD-53 to perform a professional sweep of your premises, including your telephone system. Similar in operation to the Geiger counter, the sensitive antenna system can be used to probe all areas of the room. As the antenna approaches the hidden transmitter, the audible tone clicks faster and faster while the ten-step solid-state meter indicates the signal strength.
At this point, switch MODEs from Detect to Verify to differentiate a bug from a regular radio or Television transmission. If a bugging device is present, a continuos squealing tone will be generated by the TD-53. By sweeping the probe, this tone can lead you directly to the bug.
The switch-selectible SENSITIVITY level improves the detection capabilities of the unit in high signal strength areas. For private (non-alerting) listening, an earphone jack is included.
Also included with the TD-53 is the P-01 Wideband Active Probe which covers 5MHz to 1,000MHz. Three other plug-in probes (the P-02, P-03, & P-04) are available which extend the usefulness of the TD-53. They are listed in the Countermeasures Sets Page.
The probe can be positioned up to 25 feet away from the TD-53 by using an extension cable. For example, the probe could be discreetly hidden in a target room, while the TD-53 is monitored in another room.
Also included is a 9V battery and instruction manual.